250 mg/dL in mmol/L
mmol/L is a molar unit, so the answer depends on which biomarker the mg/dL reading came from. Find your biomarker below.
| Biomarker | Factor | 250 mg/dL = |
|---|---|---|
| Glucose | 0.0555 | 13.877 mmol/L |
| Total cholesterol | 0.02586 | 6.465 mmol/L |
| LDL cholesterol | 0.02586 | 6.465 mmol/L |
| HDL cholesterol | 0.02586 | 6.465 mmol/L |
| VLDL cholesterol | 0.02586 | 6.465 mmol/L |
| Triglycerides | 0.01129 | 2.822 mmol/L |
| Calcium (total) | 0.2495 | 62.375 mmol/L |
| Magnesium | 0.4114 | 102.85 mmol/L |
| BUN (urea nitrogen) | 0.3571 | 89.275 mmol/L |
Why one mg/dL value has many mmol/L answers
mg/dL is a mass-per-volume unit (milligrams per deciliter). mmol/L is a moles-per-volume unit. To go from one to the other you have to know how heavy a single molecule of the substance is, because that determines how many moles fit in a given mass. Glucose molecules weigh about 180 g/mol; cholesterol weighs about 387 g/mol; a calcium ion weighs about 40 g/mol. The same 250 mg/dL reading therefore lands on different mmol/L numbers for each.
How to know which biomarker your reading is
Check the test name printed on the lab report next to the mg/dL value. The most common candidates are listed in the table above. If the test report uses an abbreviation you don't recognise, see our lab abbreviations reference.
Open this value in the live converter
Pick a biomarker to see the answer with the full per-biomarker derivation, or open the converter pre-filled at this value:
- 250 mg/dL of glucose in mmol/L
- 250 mg/dL of LDL cholesterol in mmol/L
- 250 mg/dL of total cholesterol in mmol/L
- 250 mg/dL of triglycerides in mmol/L
Common questions
What is 250 mg/dL in mmol/L?
It depends on the biomarker. See the table on this page for per-biomarker answers.
Why does mg/dL to mmol/L have different answers?
mmol/L is a molar concentration, so each substance's mg/dL ↔ mmol/L factor is determined by its molecular weight. Glucose (180 g/mol) has a different factor than cholesterol (387 g/mol).
Which biomarker is most likely intended?
In primary-care lab reports, an mg/dL value is most often glucose, total/LDL/HDL cholesterol, triglycerides, calcium, magnesium, or BUN. Check the test name printed on your lab report.
Use the live converter for any biomarker
For biomarkers not listed here, use the full blood test unit converter. It supports 50+ biomarkers in both directions.
Stop guessing which biomarker your number belongs to
Health3 imports your full lab report so the unit and biomarker are always identified for you. Free.
